3M™ 1860 N95 Health Care Particulate Respirator and Surgical Mask

3M™ 1860 N95 Health Care Particulate Respirator and Surgical Mask

The 1860 and 1860S healthcare respirators are designed to help provide respiratory protection for the wearer against certain airborne particles. They meet CDC guidelines for Mycobacterium tuberculosis exposure control. As disposable particulate respirators, they are intended to reduce wearer exposure to certain airborne particles including those generated by electrocautery, laser surgery, and other powered medical instruments. As surgical masks, they are designed to be fluid resistant to splash and spatter of blood and other infectious materials.

Materials
The following materials are used in the production of 1860, 1860S respirators:
Straps Braided Polyisoprene
Staples Steel
Nose Clip Aluminium
Nose Foam Polyurethane Foam
Filter Polypropylene
Shell Polyester
Coverweb Polypropylene

This respirator does not contain components made from natural rubber latex.
Maximum mass of products = 11.3g

 

Use For
Intended to be worn by operating room personnel during surgical procedures to help protect both the surgical patient and the operating room personnel from transfer of microorganisms, body fluids, and particulate material.
Always follow User Instructions and use in manners as indicated

Do Not Use for
DO NOT use in industrial settings
DO NOT use for gases or vapours (i.e. anesthetic gases such as isoflurane or vapours from sterilants such as glutaraldehyde.)
DO NOT use in any manner not indicated in the User Instructions

Approvals and Standards
NIOSH approved N95 respirator
Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
NIOSH approval number: TC-84A-0006
FDA cleared for use as a surgical mask
Health Canada Class I medical device
Bacterial Filtration Efficiency F2101 >99% BFE
OSHA Assigned Protection Factor (APF) 10
Australia TGA approved